Commercial chain link fencing
Commercial chain link fencing provides a clear, durable boundary around properties that need security without completely blocking visibility — from a small equipment enclosure to a large warehouse perimeter or a controlled government property.
Practical perimeter security for commercial property
Modern Fence Company installs commercial chain link fencing throughout Fort Smith, Western Arkansas, and Eastern Oklahoma.
Our commercial chain link systems may include
- Galvanized chain link fencing
- Black-coated chain link fencing
- Commercial and industrial fence heights
- Different wire gauges and mesh sizes
- Heavier posts and rails
- Bottom and mid rails
- Additional bracing
- Privacy slats
- Wind-screen systems
- Security toppings
- Walk gates
- Double-drive gates
- Sliding gates
- Cantilever gates
- Automatic gate operators
- Vehicle and pedestrian access control
We plan each system around the property’s security requirements, traffic, terrain, gates, daily operations, and long-term maintenance needs.
One property may use several configurations
Chain link is one of the most flexible commercial fence systems because its specifications can be adjusted for different levels of security and use.
A warehouse may have standard chain link along a low-risk boundary, heavier security fencing around an outdoor storage yard, privacy slats around equipment, and an automatic cantilever gate at the main vehicle entrance.
We install chain link fencing for
- Warehouses
- Manufacturing facilities
- Storage yards
- Equipment yards
- Apartment communities
- Schools
- Athletic facilities
- Parks
- Utility properties
- Retail service areas
- Commercial offices
- Contractor yards
- Truck and trailer properties
- Municipal facilities
- Government properties
- Construction sites
- Managed properties
Performance depends on more than the fabric
Posts, rails, braces, tension wire, foundations, fittings, gates, hardware, and access equipment all work together as one system.
A light fence with undersized posts should not be expected to perform like a commercial or industrial fence built for heavier use.
Commercial chain link may be a strong choice when the property needs
- A visible perimeter
- Controlled access
- Equipment security
- Vehicle gates
- Pedestrian gates
- Large-area fencing
- A system that follows changing ground
- Privacy screening
- Security enhancements
- Straightforward repair options
- A practical connection to access control
The traditional silver system
Galvanized chain link is used across many commercial, industrial, municipal, and government properties. It may be used around:
- Warehouses
- Storage areas
- Equipment yards
- Utility properties
- Service areas
- Schools
- Athletic fields
- Construction properties
- Commercial back lots
- Restricted work areas
Galvanized systems can be customized through changes in fence height, wire gauge, mesh, post size, framework, gates, and security features.
A darker, more finished appearance
Black-coated chain link retains the open design of chain link fencing. It may be selected for:
- Apartment communities
- Schools
- Parks
- Athletic properties
- Office properties
- Commercial entrances
- Managed communities
- Public-facing boundaries
- Landscaped commercial sites
A complete black-coated system may include coated fabric, posts, rails, fittings, and gates. Using matching components helps create a consistent appearance across the property.
The proposal should identify the specifications, not just say “chain link”
Fence height may be affected by
- Security requirements
- Adjacent public areas
- Stored equipment
- Property specifications
- Insurance requirements
- Local rules
- Privacy screening
- Security toppings
- Gate requirements
- Visibility needs
- Terrain
A taller fence places more load on the posts and foundations.
Wire gauge and mesh depend on
- Property type
- Security level
- Fence height
- Expected contact
- Equipment exposure
- Government or project requirements
- Privacy additions
- Gate locations
- Risk of damage
- Long-term maintenance expectations
Smaller mesh or other security-focused configurations may be considered where the fence needs more resistance to climbing or cutting.
A commercial framework may include
- Terminal posts
- Corner posts
- Line posts
- Gate posts
- Top rails
- Bottom rails
- Mid rails
- Tension wire
- Horizontal bracing
- Diagonal bracing
- Concrete foundations
- Commercial fittings
Gate posts often require different specifications than line posts because they support moving weight.
Bottom rails and mid rails
They can provide additional support where the fence may experience equipment contact, animal pressure, increased security requirements, wind-screen loads, high traffic, large fence heights, or project-specific performance requirements. A bottom rail may also help create a more defined lower edge than tension wire alone.
Screening changes how much wind the fence carries
Privacy slats may be installed in selected chain link systems to reduce visibility into a property. They may be used to screen:
- Equipment yards
- Loading areas
- Trash enclosures
- Mechanical equipment
- Storage areas
- Apartment service areas
- Commercial back lots
- Utility equipment
- Outdoor work zones
The fence should be designed for the screening system from the beginning rather than adding slats to a light existing fence without reviewing its posts and framework.
Wind screen
Wind screen may be used for construction-site screening, athletic facilities, temporary visual screening, equipment areas, work-zone separation and commercial privacy. It can place significant pressure on the fence during strong weather. A screen should not be attached to a fence that was not designed to carry the added load.
The topping and the fence are one system
Selected commercial and industrial properties may need additional perimeter-security features.
Available options may include
- Barbed wire
- Extended fence height
- Obstacle wire
- Additional rails
- Approved anti-climb configurations
- Security-focused mesh
- Controlled gates
Planning should consider
- Public sidewalks
- Nearby residential properties
- Employee areas
- Pedestrian entrances
- Gate movement
- Maintenance access
- Local regulations
- Project specifications
- Insurance requirements
Security toppings must be appropriate for the property and allowed by the applicable requirements.
Walk gates, double-drive, sliding and cantilever
Walk gates
Walk gates provide access for employees, tenants, residents, maintenance personnel, and visitors. Planning may include:
- Gate width
- Traffic volume
- Swing direction
- Latch type
- Controlled access
- Exit requirements
- Grade
- Bottom clearance
- Connection to sidewalks
- Separation from vehicle traffic
Double-drive gates
Wider openings for delivery vehicles, trucks, trailers, equipment, maintenance vehicles, emergency access and secondary entrances. Wide gate panels can be affected by wind and repeated use.
Sliding gates
Sliding gates move along the fence line instead of swinging into the property. They may work well where swing clearance is limited, a wide entrance is needed, vehicle stacking space is restricted, the property receives regular traffic, or an automatic entrance is required.
The travel path should remain free of parked vehicles, stored materials, snow, landscaping, and debris.
Cantilever gates
Cantilever gates slide across an entrance without using a ground track through the vehicle opening — useful for warehouses, industrial properties, storage yards, truck entrances, high-traffic commercial properties, uneven vehicle surfaces and automatic controlled entrances. A cantilever gate requires additional frame length beyond the clear opening.
Custom hillside gates
A standard square gate may not operate correctly on a sloped entrance — it may drag, leave an excessive bottom opening, or fail to open fully. We fabricate custom hillside gates around the actual grade, opening width, swing direction, vehicle clearance, fence height, support posts and expected use.
Our commercial chain link installation process
1
Project information
Property location and type, fence purpose, approximate length, required height, security and privacy needs, gate and access-control requirements, available plans and schedule.
2
Site or plan review
We consider fence lines, vehicle and pedestrian entrances, existing fencing, grade, drainage, utilities, security needs, gate operation and other construction.
3
Fence specifications
Height, wire gauge and mesh, galvanized or coated finish, posts and rails, bracing, privacy slats, security toppings, gates, automatic operation and access control.
4
Written proposal or bid
Prepared on the approved scope and available project information.
5
Approval and scheduling
After the required approval, deposit, contract, or project documentation is received, the work is prepared for scheduling.
6
Materials and gate fabrication
Fence materials are ordered, and custom gates are planned through our fabrication shop.
7
Layout and post installation
Our crew confirms the approved layout and installs terminal, corner, line, and gate posts.
8
Framework and fabric
Rails, braces, fittings, and chain link fabric are installed and tensioned.
9
Gate and access control
Manual gates, automatic operators, keypads, card readers, intercoms, or other approved equipment are installed and adjusted.
10
Inspection and follow-up
A supervisor or salesperson reviews the completed work and addresses documented concerns.
Specifications planned around the property
- 01
Serving the region since 1950
More than 75 years of fencing and perimeter-security work.
- 02
Commercial through government experience
Commercial, industrial, municipal, state, federal, and Department of Defense projects.
- 03
Employee installation crews
Our primary fence installations are completed by Modern Fence Company employees rather than unknown subcontracted crews.
- 04
In-house gate fabrication
We fabricate commercial swing, slide, cantilever, chain link, and custom hillside gates in our own shop.
- 05
Access-control capabilities
Automatic gate operators, keypads, card readers, RFID systems, telephone entry, intercoms, and related equipment.
- 06
Expandable crew capacity
Our crew capacity allows us to serve both focused commercial enclosures and larger perimeter projects.
- 07
Licensed, insured and warrantied
Licensed and insured for the work we perform, with job-specific bonding available when required. Installations include a one-year workmanship warranty — review our warranty information.
Commercial chain link across
Western Arkansas & Eastern Oklahoma
Modern Fence Company is based in Fort Smith and serves commercial properties throughout:
We also serve properties throughout Sebastian, Crawford, Franklin, Logan, Scott, Le Flore, Sequoyah and Haskell counties. Our normal service radius is approximately 75 miles from Fort Smith; we may travel farther for larger commercial, industrial, government, and specialty projects.
Perimeters, enclosures and controlled entrances
Visit our project gallery for commercial chain link perimeters, warehouse and storage-yard fencing, equipment enclosures, black-coated systems, privacy slats, security toppings, double-drive, sliding and cantilever gates, automatic entrances, access-control systems and commercial repairs. You can also read customer reviews.
Commercial chain link questions
Visit our fencing and access control FAQ for more answers.
What types of commercial properties use chain link fencing?
Chain link is commonly used around warehouses, storage yards, industrial properties, schools, athletic facilities, apartment communities, utility areas, government facilities, and commercial service properties.
Do you install both galvanized and black chain link?
Yes. Galvanized and black-coated systems are available based on the project specifications.
What chain link fence heights are available?
Commercial chain link is available in different heights. The appropriate height depends on security requirements, property use, local rules, gates, and screening.
What wire gauge should a commercial fence use?
The correct gauge depends on the fence height, property use, expected contact, security needs, and project specifications.
Can you install privacy slats?
Yes. Privacy slats are available for selected chain link systems. The posts and framework should be designed for the added wind load.
Do you install wind screen?
Wind screen may be available for selected commercial, industrial, athletic, construction, or screening applications.
Can you install barbed wire?
Barbed wire and other security toppings may be available where appropriate and allowed by applicable project and local requirements.
Do you install bottom rails?
Bottom and mid rails may be included when required by the approved fence design.
Can you build gates for tractor-trailers?
Yes. Gate width should be planned around vehicle size, trailer swing, turning radius, road width, and gate setback.
Do you fabricate sliding and cantilever gates?
Yes. Sliding and cantilever gates are fabricated in our own shop, with the support posts, rollers, frame, operator and travel area planned around the complete gate.
Protect the property without slowing the site down
Commercial chain link fencing should protect the property while allowing employees, vehicles, equipment, tenants, and authorized visitors to use the site efficiently.
Tell us
- Where the property is located
- What type of property is involved
- What the fence needs to protect
- The approximate fence length
- The height being considered
- The required wire or security specifications
- Whether privacy screening is needed
- Whether security toppings are required
- The number and width of gates
- The largest vehicles using the entrances
- Whether automatic gates are needed
- Whether pedestrian access is required
- Whether access control is needed
- Whether existing fencing must be removed
- Whether plans or specifications are available